 szjingya01@cleanesd.com.cn   +86-512-67708111
You are here: Home » News » Industry news » How to judge the quality of the cleanroom wiper

How to judge the quality of the cleanroom wiper

Views:14     Author:Site Editor     Publish Time: 2016-09-19      Origin:Site


 1.How to choose the type of the cleanroom wiper

a.Weight:The higher the weight ,the better.

b.Quality:the microfiber is better than the polyester cleanroom wiper.

c.Softness:The softer,the better.

d.Wear resistance:Strong wear resistance,not easy to release fiber.
 
2.The Edge sealing of the cleanroom wiper

There are several seal edges of clean room wiper: cold cutting, laser cutting, Ultrasonic sealing,Heat-sealed edge .Different seal edges are applied to different purposes.

a.Laser cutting:Using laser sealing,four edges are not yellow,no-easy fiber off,non deformable.It is more suitable for high-grade clean room. This way of cutting in the market now is mostly sealed by laser.

b.Ultrasonic sealing:The edge is smooth, reliable, accurate trimming, no deformation, no fluff and so on.The edge is easy to tear off after cleaning.

c.Heat-sealed edge:No easy to chip off,the edge is easy to tear off after cleaning.

d.Cold cutting: easy to chip off.

 
3.The testing of cleanroom wiper

1.Testing report.

2.Ion content:within the range of test standards.

3.Water absorption:conform to the requirement of the products.

4.Dust content:Low dust content.
 MVO_5122

Clean Wipers        Cleanroom Swabs        Jingya Products        Jingya News          About Jingya        Contact Us
Tel: +86-512 67708111
Fax: +86 512 62393655
E-mail: szjingya01@cleanesd.com.cn
Tel: +86-512 67708111 Fax: +86 512 62393655
E-mail: szjingya@cleanesd.com.cn
Copyright 2015 Suzhou Jingya Clean Technology Co.,Ltd.
Site Map